Spray paint
400ml

The spray nozzle provides high coverage strength for the applied surface

The 400ml aerosol paint is also intended for minor repairs or damage caused during the transportation and installation of sheets

Prepare the painted surface by degreasing the painted area and protecting the surrounding surface from dust using masking tape and paper.
Shake the paint container for about one and a half minutes to mix it well.
Perform a test spray to compare the paint color with the color of the repaired surface.
Apply two to three layers of paint, allowing approximately 2 minutes of drying time between each layer, depending on environmental conditions such as temperature.
The applied paint layer should be touch-dry.
The optimal temperature for applying the paint is between 5°C and 25°C, taking humidity into account.
If the entire paint in the aerosol container has not been used, place the container with the nozzle facing down and press the nozzle to clean the valve and spray nozzle until a gas stream appears (about 2-3 seconds). Performing this action will prevent the paint from drying in the nozzle and valve, ensuring that the paint can be used for future applications.